SPS 468x60 Banner
Search this forum:
Search
You are not authorized to create a new topic
Page 6 of 164 << < 45678 > >>
Topics
 Replies
 Views
 Last Post
0 Replies and 1248 Views STR guys want a 245/40 15?? Help make it happen.  1248  0 Started by  VXCL Hankook rep is involved.  Go to this page of one of their drift drivers and help support the push for 245/40 15 rs3 by liking and commenting.  https://www.facebook.com/dannygeorgeracing/posts/503330439750565    
0 1248
09 Oct 2013 10:43 PM
137 Replies and 50167 Views Which car would you pick for STX  50167  137 Started by  JR125
(Topic has multiple pages1 2 3 ... 4 )
Ok....now that the Civic is gone.....STX will be every intrested next year, since there are not much people has build/setup the car to the max...next year will be a builder class for STX. What would be your pick in STX RX-8 WRX E36 325IS E36 328IS E30 M3 other
137 50167
by  MilesJJump to last post
08 Oct 2013 04:24 PM
12 Replies and 4565 Views SM/SSM or higher?  4565  12 Started by  tstkl So I have read the rules for SM/SSM and I have often heard 'if it doesn't say you can do it, you can't do it' but I just wanted to clear up some things I've read/heard that didn't exactly come off from the rules. Car is a 1988 Chrysler Conquest TSI (rebadged Mitsubishi Starion) which came with a 2.6L sohc turbo 4 cylinder. I put a 4g63 2.0L dohc turbo 4 cylinder in there, but also put a LS-1 spec T-56 Tremec 6 speed in it which required a new transmission tunnel. I'm mostly worried about this s...
12 4565
by  tstklJump to last post
03 Oct 2013 06:17 PM
6 Replies and 2304 Views STS Miata ECU?  2304  6 Started by  Firune I have been looking around for a Megasquirt for my 91 sts miata does anyone know of some one that makes them still
6 2304
by  RenegadeJump to last post
02 Oct 2013 11:28 AM
3 Replies and 1314 Views Legal to remove radio bezel  1314  3 Started by  Renegade Looking to remove part 5 in the drawing http://www.hondapartscheap.com/part...er/console I want put an aluminum sheet metal plate for switches and such. The original part is made of plastic and should weigh less than 1lb, I'll weigh one later on. Etiher way the sheet metal may way as much or close to the original part once it is populated.   thanks  
3 1314
by  RenegadeJump to last post
30 Sep 2013 02:24 PM
58 Replies and 12927 Views Fiat 500 in STF  12927  58 Started by  billdayton
(Topic has multiple pages1 2 3 )
Here is a followup to the Fast Track classification of the Fiat 500 in STF - Note that the Fiat 500 must be modified to meet the measurement requirements in 3.1 to run in STF, we can't just put a stock 500 in the class and call it safe. Here is a note from Brian Harmer: Hi, Bill, You are correct even though the Fiat 500 is classed in STF it still has to meet the roll over requirements. I think if someone were to lower the car and widen the track it could meet the requirements.
58 12927
by  mmwhitneyJump to last post
08 Sep 2013 10:14 AM
5 Replies and 5236 Views Legal steering quickener install - should I write a letter?  5236  5 Started by  Black R '16.F.1...Steering components, including the steering rack and/or box, tie rods, idler arms, power assist devices, and related components, may be replaced, added, moved, or removed. The steering column, within the passenger compartment, is specifically excluded from this allowance. This does not permit removal or modification of column-mounted accessories. Wheel-mounted electrical switches such as those for the horn, radio, cruise control, or shifter may be relocated and/or replaced, or eliminat...
5 5236
by  MSmith7Jump to last post
21 Aug 2013 10:04 PM
5 Replies and 3072 Views SMF civic - legal to hammer on frame rail a tad?  3072  5 Started by  Black R SMF civic - legal to hammer on frame rail a tad Bseries swap in an EF civic requires (i think) a mild massaging of the frame rail to clear the alternator (iirc).  Will this earn me a protest Additionally, I was test fitting a supercharger, and the stepper pulley requires additional massaging of the frame rail to clear the pulley.  Is this legal  I have gone through the rulebook, and it seems legal - but just want to confirm before I have to ditch it and go another route.&...
5 3072
by  ScreechJump to last post
19 Aug 2013 07:30 PM
0 Replies and 895 Views Interior for SSM cars  895  0 Started by  Thunderbug Automotive My dad and I are going to be building a 88 corvette for SSM.  We are wondering what all can we do in the interior of the car for SSM.  Have an idea what we can do just want to make sure im correct.
0 895
12 Aug 2013 12:21 PM
0 Replies and 1721 Views Nationals co drive available for STX and STXL  1721  0 Started by  BProtaryracer Ok ladies and gents.  I am offering up my car for co competition in STX and STXL this year for Nationals.  It is a 2004 RX8 that is fully setup for the class.  It was the fastest RX8 last year at Nationals and has been developed further this year.  Most recent finish is The Pro win in New Mexico and before that a 2nd place in El Toro by .087 margin.  Contact me directly via email or phone for further details on this great car and excellent opportunity to run a competitiv...
0 1721
06 Aug 2013 04:46 PM
3 Replies and 2658 Views Top Speed at 2012 Nationals, ST_?  2658  3 Started by  CMF125 People who were running street tires at nationals 2012, what were the top speeds on both courses
3 2658
by  morrisgJump to last post
28 May 2013 01:54 AM
1 Replies and 1447 Views 370z classification and 9 narrower than stock wheel rules  1447  1 Started by  wrandleman The current rulebook is including the non-nismo 370z and the 14.4 rule requiring stock wheels be downsized to 9 inches wide. The February Fasttrack had these as proposals.  Were they adopted or is SCCA having document version and control issues with rulebook again  There is no notation stating what items in red are.  
1 1447
by  mraznyJump to last post
27 May 2013 04:08 PM
1 Replies and 1568 Views STR Miata  1568  1 Started by  VettesRule We just acquired a 94 Miata with 116k miles on the OEM engine, trans and torsen diff from a friend. Engine -- ECU has a tuned chip in wth a 12:1 afr, Racing beat header and Borla exhaust (no cat yet), Racing beat cold air kit to relocate air filter.  Dry compression check with 155 ± 5 psi. Suspension -- Fat Cat non adjustable Bilstein dampers with 700 / 450 springs, Flying Miata sway bars (factory looking end links), agressive alignment at about stock ride height. 15x7...
1 1568
by  VettesRuleJump to last post
25 May 2013 09:09 PM
89 Replies and 34372 Views FRS/BRZ STX builds?  34372  89 Started by  Charlie Davis
(Topic has multiple pages1 2 3 ... 4 )
Is anyone working on a n STX FRX/BRZ It should be no surprixe that these cars were all over the place at SEMA. I talked to AEM, DC and several others, and the consensus seemed to be that within ST specs the car will weigh in the mid 2500 lb. range, and that power increases will be modest (as in &lt;20 hp and tq.) This seems to contradict the info on the street, which has indicated much higher power levels. I think the entire STX class is very interested in upcoming builds...
89 34372
by  dwxJump to last post
12 May 2013 05:21 PM
138 Replies and 50092 Views Dunlop Direzza Z2 (or BFG Rivals) - anyone got em yet?  50092  138 Started by  John P
(Topic has multiple pages1 2 3 ... 4 )
Have these tires not been released anywhere yet I know they are not available in the US, but it seems the only info is the Japanese website I've seen posted over an over. I just pre-ordered a set through Tirerack (est. March), but am very curious to anyone with real-world access how the tires are and if the same rules apply to the Z2. i.e. - do they need to be shaved...... I wasn't going to. Are they not released in Japan or anywhere yet where someone has reviewed them other than Dunlop I...
138 50092
by  mraznyJump to last post
10 May 2013 11:09 AM
1 Replies and 1533 Views What Spring Rate for SM-F?  1533  1 Started by  livelyjay I'm building a car to run in SM-F locally and maybe nationally. I have no idea if it will be competitive, but probably not. The project was more of a learning experience than building something to win at Nats. It's a 1987 Nissan Pulsar, which is essentially the B13 Sentra SE-R chassis. Curb weight is around 2550 and I have no idea what I'll be able to get it down to within the class rules. I've already got Koni single adjustable shock inserts for the B15 Sentra and I'm going to be buying Gr...
1 1533
by  MSmith7Jump to last post
07 May 2013 09:07 AM
12 Replies and 5205 Views RSX TypeS in STX  5205  12 Started by  BNR32GTR So, am I the only one that thinks the Acura RSX TypeS should be put into STX instead of STF The TypeS is very comparable to the 06 Civic Si in Hp and Curb Weight and it is in STX. 
12 5205
by  xnamerxxJump to last post
02 May 2013 11:07 PM
48 Replies and 18238 Views STR NA Miata Suspension  18238  48 Started by  rccardude04
(Topic has multiple pages1 2 3 )
I saw this thread: http://www.sccaforums.com/forums/forumid/23/threadid/37915/scope/posts and it has answered some questions but I still have a few things I'm wondering about and don't see in any searches I can come up with. If there's another thread out there feel free to link me to it but my keywords aren't getting me what I want. :) I bought a '94 Miata as a toy. I'm in my 2nd year of Solo and have always wanted a Miata so I got one before I started my second season. Right now, I have Koni S...
48 18238
by  rccardude04Jump to last post
24 Apr 2013 10:08 PM
4 Replies and 1685 Views Trans choice for B series car  1685  4 Started by  90_crx_si Hey guys, posted this over on H-T but no responses (forgot why I never go there &gt;_&gt;), but I know you guys and gals can help. Ok, so this off season I picked up a GSR I'll be freshening up with new bearings, ARP fasteners, P30's and springs so I can run some mild cams down the road. I've been campaigning my CRX with my old A6 block and Z6 head with full bolt on's and tuned, so maybe 120whp, with a ZC/Si hybrid trans. It runs out 2nd gear about 63mph with current 225/45 15 R comps an...
4 1685
by  WrongWheelDriveJump to last post
23 Apr 2013 01:52 PM
30 Replies and 9236 Views Sub-frame / Crossmember clarification for use of a traction bar  9236  30 Started by  Renegade
(Topic has multiple pages1 2 )
Per the December Fastrack : STREET MODIFIED ITEM 22) Add new subsection 16.1.T: &ldquo;T. Alternate subframes are allowed to facilitate motor mounting only. Suspension pickup points on the subframe must retain stock geometry. Weight of the subframe must be equal or greater than the stock unit.&rdquo; In conjunction with the above, remove 16.1.P line which currently reads: &ldquo;These allowances do not permit extensive modifications to a sub-frame or cross member to lower an engine ...
30 9236
by  Black RJump to last post
10 Apr 2013 04:50 PM
You are not authorized to create a new topic
Page 6 of 164 << < 45678 > >>


RSS Feed Available
Vorshlag 88x31 Button Mooresport Button
Sunoco 88x31 Button
Woodhouse Motorsports SPS 88x31 Button
G-Loc Button

Advertise on SCCAForums.com and reach thousands of visitors per day!

SafeRacer FREE SHIPPING over $99

Shop for Pirelli tires at Tire Rack. blank




Sunoco Bottom 468x60 Banner