Go to previous topic
Go to next topic
Last Post 23 Apr 2014 03:43 PM by  s1mpsons
Northeast Performance Alignments & Corner Balancing Shops - Comprehensive List
 0 Replies
Author Messages
s1mpsons
Basic Member
Basic Member
Posts:159


--
23 Apr 2014 03:43 PM
    This thread is place to highlight performance alignment and corner balancing specialist in the northeast region. Please use the following format if you know of any.

    "Name:
    Location:
    Contact:
    Notes:"

    Name: SJF Performance
    Location: West Milford, NJ
    Contact: 973-896-1672, info@sjfperformance.com
    Notes: My good friends and co-racers Dave and Steve at SJF Performance are now offering combined services. Both of these guys have been critical to the success of the Hamfist Racing NASA TT and SCCA Solo cars over the last 5 years! Together they can perform precision calibrated corner balancing and race-spec Hunter alignments. Dave's a state certified metrologist who is obsessed with precision measurements and calibration and getting the cross weights of your race car dead even. He's also a dedicated racer with background in autocross and drag racing. Steve is also a long time Tri-State autocrosser and drag racer who will make sure he matches your alignment specs to a fraction of a degree. The service rate is reasonable too, $450! Dave and Steve are the most careful, precise, knowledgeable and nicest people servicing the motorsports community in the Tri-state Area! Between the two of them they have gobs of experience in all types of performance cars, especially S2000s, Evolutions, Corvettes, WRXs, Camaros, Mustangs, Miatas, etc. The shop is convenient to PA, NY and CT (not to mention NJ) located in West Milford, NJ. Call, Text or Email Steve now at 973-896-1672 or info@sjfperformance.com.

    Name: Speed1 Allentown
    Location: 898 Old Rt 22, Lenhartsville, PA
    Contact: (610) 756-3000
    Notes: fka KDR Performance, They are big in the rotary engine tuning. Dave is the contact/owner. He also has dynojet for NASA cmpliant dyno testing. Their mechanics also do amazing race fabrication. They have worked on both my NASA TT Mazda GT RX7 and my SCCA Solo SSM '93 RX7.

    Name: Camber Toe
    Location: 659 Merrick Rd, Lynbrook, NY 11563
    Contact: (516) 872-6400
    Notes: Other SCCA and NASA guys refer to them with satisfaction. I have no personal experience.


    ---