PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 17 Sep 2007 04:25 PM by  gc102750
Ignition Switch issues
 1 Replies
Sort:
You are not authorized to post a reply.
Author Messages
gc102750
New Member
New Member
Posts:


--
17 Jul 2007 09:14 AM
    I tried to put a Longacre Ignition switch on my 84 RX7 (IT7). I hooked the White/Red wire to brown power in wire. I hooked the Black/White to the yellow accessories wire and I hooked the Black/Yellow to the green starter button wire. When I flip the toggle switch I can tell the gauges are getting power. When I press the starter button, it sounds like the fuel pump is kicking on, but it is not spinning the starter. It almost seems like I need to hook both the Black/White and the Black/yellow to the yellow accessories wire, but then I'm not sure what I should hook the green starter button wire to.
    Any ideas on what I have hooked up wrong?

    Thanks, Gordon
    <!--IBF.ATTACHMENT_118296--><!-- THE POST -->
    gc102750
    New Member
    New Member
    Posts:


    --
    17 Sep 2007 04:25 PM
    Was able to solve this.
    You are not authorized to post a reply.


    Woodhouse Motorsports
    SPS 88x31 Button G-Loc Button
    Vorshlag 88x31 Button Leroy Engineering Micro Button
    Sunoco 88x31 Button

    Advertise on SCCAForums.com and reach thousands of visitors per day!

    SafeRacer FREE SHIPPING over $99

    Shop for Pirelli tires at Tire Rack. blank



    Sunoco Bottom 468x60 Banner