PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 02 Jul 2014 03:07 PM by  ESP89
Max Rim and tire size on a SN95 Front
 3 Replies
You are not authorized to post a reply.
Author Messages
New Member
New Member

24 Jan 2014 06:26 PM

    Has anyone who runs a SN95 Mustang ever put  17 by 9.5 or 10 inch wheels up front with 275 Hoosier or Hankook Slicks?   

     I am looking at putting on some Enkie RPF 01's   and I am hoping I can get 9.5's  in  I know I can get 9.0's under her.     

     Anyone had experience with this?   Thanks in advance!  

    Veteran Member
    Veteran Member

    25 Jan 2014 08:46 AM
    I don't know if he posts here, but look up Marcus Merideth, Jim Crider or Dave Feighner. They all have/had well built SN95 ESP cars and ran 17x11 with 315's on all four corners. I don't remember the wheel specs, but they were the same on all 4 corners on Marcus's car.

    Step one in making it work was to not lower the car too much in the front, but that is a good idea for a lot of other reasons as well.

    New Member
    New Member

    22 May 2014 06:58 PM
    Did you ever get a certain answer on this? I have similar question, it is my understanding that I can fit an 18x10 on the front with a 285 RS3 perhaps using a spacer, but I would like to know what is required for certain before I spend the dough.
    Basic Member
    Basic Member

    02 Jul 2014 03:07 PM
    the 17X11 with 315 will work on the front. You will hit the control are at full lock and might rub some on the lower corner of the fascia.
    You are not authorized to post a reply.

    SPS 88x31 Button Woodhouse Motorsports
    Vorshlag 88x31 Button G-Loc Button
    Sunoco 88x31 Button

    Advertise on and reach thousands of visitors per day!

    SafeRacer FREE SHIPPING over $99

    Shop for Pirelli tires at Tire Rack. blank

    Sunoco Bottom 468x60 Banner