Not sure if this is the right place to inquire.

These are fabricated. For one thing the spindles are at different heights on the left and right. I assume the left has some positive camber built in looking at it and the way most left hander spindles I've seen are. The control arms measure the same left and right. I don't like the uppers because the ball joint is angled downward and looks like it's at the end of it's travel with the front jacked up. I will most likely replace both spindles and upper control arms at minimum.

Thanks for the links. I think I've already checked those out but I'll look them over again.

I should be able to put something together from here if I can figure out which parts I need.

http://www.colemanracing.com/Spindle-...