SCCAForums.com

Note: these tires will NOT fit a Miata without cutting/flaring the fenders! http://fatcatmotorsports.com/flares/Photo of the wheels with tires mounted: http://fatcatmotorsports.com/igallery/graphics/A6_245_45_16_on_16x10_Kodiak0011.JPG Mounted on ...

OK, I'm selling it all (after Solo Nationals) to start fresh next year in a shifter kart. I'm putting this out now to gauge interest. I'm happy to answer any and all questions about all of this stuff. scoob5555 at yahoo dot comFor sale: 1991 Honda Civic SiExpertly setup for autox (STS) by a few folks, but particularly ...

For sale, '87 ITC Honda CRX DX 1.5l. This car has been ultra reliable, finishing ever race that I've ever run with it over the past 3.5 seasons. It is a race winner, and in an area with great ITC competition, will be even more of a blast.The specs:1987 Honda CRX DX 1.5 liter car, white over black*Cage- Bolt in, with welded in side bars and dash ...

For Sale:(4) Revolution Lightweight RFX Competition Wheels with worn Toyo Proxes tires.Silver, 14'' x 7'', 28mm Offset, 4.9'' Back Space, 4 x100mm, 56mm Hub FitSteel Lug Nut Fit Inserts as from factory.Revolution part number: 14CPW6Wheel weight 12.7# All Very Good Condition.These are some of the best wheels ever made for competition or street ...

As the title states I am looking to buy a set of Kosei K1's in 15x7 form with a +38 offset and 4x100 drilling. I would prefer the white model but realize that they are harder to come by. Would like the wheels to come w/o tires. Will pay for shipping but prefer to pick up a set within about 45 minutes of central Ohio.

I have no idea what car they're from, but here's what I do know:13x4.5'', offset 45mmHonda and Enkei logos stamped on the back175/70/13 tires on them, in OK shapeMy scale says they are 24 lbs with fully inflated tires on them. These would be good for someone that's currently running on steelies or VX rims. :)I'd like to get $200 plus shipping for ...

http://www.rr-ax.com/bbs/forums/thread-view.asp?tid=5950&posts=3&start=1   Thanks!   AJ 

Meccanic Shop North-built B20 non-VTEC enginebored .020 over12.9:1 Wiesco pistonsEagle RodsAll ARP hardwareFerrea oversize intake valves (1mm over)Ported and polished headcustom camsCrower springs and retainersCustom modified rocker armsEagle cam pulleysOiling system modified for use of external oil filter systemJust 2 races old, dynoed at ...

1991 right hand drive hartop mr2 powered by a 3sge motor. Car has 81,006 miles, Car is under my name but not street legal in California, I was Driving Car on Temporary Permits. This would be for someone who can maybe legalize this in another state, Or have this for track or show. Because this car has a 3sge motor it seems to have the ...

Mostly on Sunday (a few on Saturday).  I'm not sure what heats I took a little of 1st, 3rd, and 4th.   I have not yet filtered out the junk.   All the full resolution photos are right there, just click through (as long as my ISP doesn't stop uploading because of bandwidth).  If the server becomes unavailable because ...

1999 Civic DX Hatch D16Y7Dark Amethyst PearlHas a 8 point welded roll cageHas full interior(some parts cut around for cage)Eibach full coiloversComptech rear sway barComptech rear tie barST front sway barTenzo steering wheelHawk Blue brake padsstainless steel brake lines4 wheel disc brake conversionb&m short shifterceramic clutch8 lb ...

mlmf:29th out of 44 in STS for first time out. Did not like the east course and the cold. Plan on doing alot of test and tune on the car. I am just glad that I did not come in last first time out. I'll echo that in STX!  Glad I didn't come in last my first time out.  NO clean runs on Tuesday and I still came in 29th out of ...